Engineering

Support for Future Engineers of India


Basic Electrical and Electronics Engineering (R-13)

University

JNTU Hyderabad

Department

Automobile Engineering

Semester

1 Year I Semester

Review

(0 REVIEW)

₹ 800

Unit-246

  1. Basic Definitions
  2. Basic Definitions
  3. Types of Element
  4. Types of Element
  5. R-L-C Parameters
  6. R-L-C Parameters
  7. Voltage and Current
  8. Voltage and Current
  9. Independent and Dependent sources
  10. Independent and Dependent sources
  11. Source Transformations V-I relation for passive elements
  12. Source Transformations V-I relation for passive elements
  13. Ohm's Law
  14. Ohm's Law
  15. Kirchoff's laws
  16. Kirchoff's laws
  17. Problems based on Kirchhoff's Laws
  18. Problems based on Kirchhoff's Laws
  19. Network Reduction Techniques - Series parallel
  20. Network Reduction Techniques - Series parallel
  21. Problems based on Parallel Resistance Division Rule
  22. Problems based on Parallel Resistance Division Rule
  23. Network Reduction Techniques -Star to Delta Transformation
  24. Network Reduction Techniques -Star to Delta Transformation
  25. Nodal analysis
  26. Nodal analysis
  27. Problems based on Nodal Analysis
  28. Problems based on Nodal Analysis
  29. Form factor
  30. Form factor
  31. Types of Sources
  32. Types of Sources
  33. Problems based on Source Transformation
  34. Problems based on Source Transformation
  35. Steady state analysis of series,parallel
  36. Steady state analysis of series,parallel
  37. Series - parallel combinations of R,L,C with sinusoidal excitation
  38. Series - parallel combinations of R,L,C with sinusoidal excitation
  39. Concept of reactance,impedance,susceptance and admittance
  40. Concept of reactance,impedance,susceptance and admittance
  41. Phase and Phase difference
  42. Phase and Phase difference
  43. Concept of power factor
  44. Concept of power factor
  45. J notation,complex and polar forms of representation
  46. J notation,complex and polar forms of representation